Are you a reseller or buying in bulk? Call us today.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?
(based on 8 reviews)
of respondents would recommend this to a friend.
Reviewed by 8 customers
Displaying reviews 1-8
Back to top
(1 of 1 customers found this review helpful)
I would buy this product again and again
By GEEBEEGILBERT ELECTRONICS ENG.
from OPA-LOCKA, FL
About Me Academic/Professional Researcher
Comments about Cole-Parmer Panel-mount Remote Probe Thermometer:
I USE THE INSTRUMENT TO MONITOR TEMPERATURE OF LARGE TANK OF CHEMICALS AT 200F IN ORDER TO GET THE MOST OF THIS INSTRUMENT i HAD TO ENCAPSULATE THE READOUT AND THE HANDLE ALONG WITH THE CABLE IN ULTRA GLOSS EPOXY LEAVING EXPOSED ONLY THE STAINLESS STEEL TIP.IT WORKS PERFECTLYALSO, INSIDE THE INSTRUMENT, THERE IS A JUMPER IN THE CIRCUIT BOARD THAT ALLOWS FOR THE INSTRUMENT TO READ TEMPERATURE IN F. WHEN IS FIRST TURNED ON
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Was delivered on time.This timer is good
from Bucaramanga Colombia
About Me Lab Assistant
This product is used in laboratory.Accuracy is OK.
We are going to buy 2 each more
from Soltech Col
Good material and deliver quickly
ergonomics, mfg quality
from New Bedford, MA
The thermometer is listed for temperatures above 500 degrees F and it measures it as well. Unfortunately the insulation of the sensor cannot stand any high temperatures (>200 degrees F?), it will deteriorate and shorten the measurement. I could not exchange the sensor without opening the housing. Had to discard this equipment after first use. Waste of [$]. Would not recommend it.The buttons for on/off, F/C and max/min are tiny and located on the back between the housing and the attachment knob. If you insert this thermometer in a housing you will not be able to use them (ON/OFF incl.!) I wonder who had that genius idea.
Bottom Line No, I would not recommend this to a friend
Don't wate your money!!!
from North Palm Beach, FL
I have a Sub Zero refrigerator and the repairman recommended getting this kind of thermometer stating that it would be more reliable than one that is left inside all the time. The temp read by this gadget of liquids in the refrigerator NEVER truly indicated what the correct temp was.Am very disappointed. Does not do the job.
Merchant response: We are sorry to hear about your product experience. We do value your opinion and this information will be shared with our manufacturing partners in a drive to provide better quality products. -QA Department
very good and acurate
from Boca Raton Florida
We use it to measure our vaporizers heating element temperature in our vaporfection vaporizers junior digital model.it works great.
(2 of 2 customers found this review helpful)
Worked fine for my experiment
I used two of these to test air temps in the engine compartment of my car. Car "enthusiasts" and "performance parts" makers claim some increased performance with a "CAI" or cold air intake.I wanted to see what the temps were between the stock air intake and the proposed location of the cold air intake.Bottom line was that at speed, the difference was a little less than 4 degrees Fahrenheit, with the stock air box being the warmer. I was able to determine that 300 plus dollars for 4 degree cooler "cold air intake" was not such a good value, especially considering that my turbo charger heats up the air anyway.
Images shared by Charles
This is not at speed. This is 10 min aft shutdown.
Tags: Picture of Product
(4 of 4 customers found this review helpful)
Perfect for small project monitoring
from Cuba, NY
Works well, monitors exhaust temperatures of coal heat stove into chimney and plenum air temperature.