Temperature Uniformity±5°C over 9 data points at a setpoint of 1000°C
Rise Time60 minutes (measured with an empty chamber to 100°C below maximum temperature)
Overall Width (in)18
Overall Height (in)22
Overall Depth (in)26
Overall Width (cm)45.7
Overall Height (cm)55.8
Overall Depth (cm)66
Display4.3" color touch screen
Control TypePID
Power (VAC)230
Power (Hz)50/60
Heater Wattage (watts)2400
DescriptionAshing Furnace with Integrated SmartControl, 1100 °C, 5" x 8 x 7
WarrantyManufacturer defect
Includes
3-m (10-ft) long power cable.
Key Features
Easily configure and view setting with SmartControl touchscreen PID control system
Rate of 6 air exchanges per minute ensures sufficient oxygen for ashing process
Long life Inconel sheathed type K thermocouple
Vertical lift door offers operator safety
Conforms to ASTM specifications D874, D482, D5184, D3174 and ISO specifications 3987, 6245, 10478, 1171
Chamber measures 20 cm W x 13 cm H x 17 cm D (8" x 5" x 7")
Height with door open is 81.2 cm (32")
Manufacturer defect warranty
More About this Item
Controlled airflows and high-temperature heating elements of the ashing furnace provide ideal conditions for complete combustion of test samples for analysis. The furnace features wound wire heating elements protected by hard ceramic plates to heat up to 1200 °C (2192 °F). Air is preheated before entering the chamber ensuring less air temperature fluctuations.
The 4.3" color SmartControl touchscreen interface is easy to configure using "slide nav" finger icon navigation (similar to smartphones or tablets) or as a drop-down menu. The display splits into two sections—the icon bar and main display area. The icon bar (always visible) provides one touch selection of the menu, help, home, alarm icons, date/time, etc. View loop information with configurable tag names, active PV, SP & PID % values, on the main display area.
Safety features include a hinged vertical lift door that keeps the hot door insulation away from the operator; a door safety switch interrupts power to the heating elements when the door is opened. The air gap between the heated chamber exterior and the furnace exterior surface minimizes the furnace exterior surface temperature, ensuring operator safety.
Note: Continuous operating temperature is 100°C below maximum temperature.
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.
