gabled polycarbonate cover, sample shelf, and 6-ft (1.8-m) power cord.
StableTemp utility baths combine precise temperature control and excellent temperature stability to provide you with reliable heating. These baths feature dual thermostats — a primary microprocessor-based temperature controller that provides ±0.1°C precision, and a secondary over-temperature safety sensor prevents samples from overheating. For optimal temperature accuracy, the primary controller can be calibrated to your reference thermometer.
The stainless steel tank is seamless — no welds to leak or rust — and the rounded corners provide an easy-to-clean interior. Hinged polycarbonate lid allows condensation to flow back.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:I read in the manual that this unit defaults to 20C. Given the spec of ambient +5C - 100C. Would it attempt to control below that +5C above ambient? Basically I need to get 25C and don't really mind if it overshoots (within reason of course)
A:If the set point is not changed, it stays at 20C. It can only be adjusted within the parameters based on the ambient temperature.
Q:Does the bath circulate?
A:The following water bath 14576-00 does not circulate. To be able to circulate the bath would have to have an immersion circulator with either force or force suction capabilities.
Q:Min temperature "Ambient +5C".
A:No, this means that the temperature range at the low end will be 5C above ambient (room temperature), hence ambient + 5C.
Q:What are the internal dimensions of the water bath?
A:The internal reservoir dimensions are 3.9 x 4.3 x 6" (9.9 x 10.9 x 15.2 cm)
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.