Digi-Sense Traceable® High-Accuracy RTD Digital Thermometer with Calibration; Wire Probe

Representative image only.
Digi-Sense Item # EW-37804-03
Monitor minimum and maximum temperatures— all at a single glance!
  • Get accurate, reliable measurements with included NIST-traceable calibration
  • Temperature-buffered platinum RTD probe
  • RTD probe insures linear response and high accuracy across the entire range
  • Triple-display—shows high, low, and current temperature simultaneously

PRODUCT OPTIONS

$128.18USD / Each
$150.80USD / Each
Time to recalibrate?
for an additional
$62.00USD / Each

SPECS & DESCRIPTION

Specifications & Description

  • Meter Measurement TypeDigital Indicator
  • Number Of Probe Channels2
  • Min Temperature (° F)-58
  • Max Temperature (° F)158
  • Min Temperature (° C)-50
  • Max Temperature (° C)70
  • Accuracy±0.1°
  • Resolution0.01°
  • AlarmYes
  • Display Type0.75" Display
  • Height (in)4 1/4
  • No. of Probe(s) Included1
  • Probe Diameter (in)0.1875
  • Probe Length (in)7/8
  • BatteryAA Battery (1)
  • DescriptionTraceable® High-Accuracy RTD Digital Thermometer with Calibration; Wire Probe
NIST Traceable Calibration

Includes

NIST-traceable calibration certificate with data, plastic stand, double back tape and hook-and-loop fastener for attaching holder to any surface, stainless-steel probe(s), and two AA batteries

Key Features

  • Get accurate, reliable measurements with included NIST-traceable calibration
  • Temperature-buffered platinum RTD probe
  • RTD probe insures linear response and high accuracy across the entire range
  • Triple-display—shows high, low, and current temperature simultaneously

More About this Item

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period—minimum and maximum temperatures are stored until the memory is cleared. The 4-wire platinum probe insures linear response and high accuracy across the entire range.

The built-in alarm provides an alert when temperature rises above or falls below a user defined set point, and is programmable in 1° increments. A visual and audible signal continues even if the temperature returns to non-alarm range until reset by the user.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included hook-and-loop strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.
NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 37804-03 has a wire probes bullet sytle end and is designed for general-purpose applications.

REVIEWS

Q&A

CUSTOMER SUPPORT

Need Help with this product?

Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

Call Us At1-800-323-4340
Live chat