Choose from unshielded, shielded, or shielded with valve flow meters suitable for a wide range of applications.
Unshielded Flowmeters work well in low-pressure applications. Connect the flowtube end directly to tubing having the proper inner diameter. Maximum pressure rating for unshielded flowmeters is 15 psi.
Shielded Flowmeters are better suited to higher-pressure applications or for installations requiring a panel-mounted flowmeter. End bushings are molded with dual connection capability—tubing or threaded.
Shielded Flowmeters with Valves offer flow monitoring along with precise control through an integrated 20-turn micrometer valve. The valve can be adjusted from 0.1 to 100% of maximum flow (semilogarithmic) and provides recise regulation from 0.3 to 60% of maximum flow.
The tube size 11 flowmeter has a flow range for air of 1 to 280 mL/min and 0.01 to 4.0 mL/min for water with glass float.
Glass taper joints are available upon request—call our Application Specialists to order.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:I have size 12 (shield flow meter)on hand. I want to change to size 11 tube. I think the shield is interchangable from size 10-13? What part no. should I order? Can I order the unshield size 11 and install into my current shield after removing size 12 tube.
A:The tube can be purchased separately using part number 00250GI. It is just the glass tube and it can be changed out with the size 12 tube for your shielded flow meter. Please contact our technical application specialists for additional assistance (contact information can be found in the "contact us" section on the web page).
Q:In the product listing (ew-03232-21) two flow ranges are included one for glass and one for ss. Are both included with the meter?
A:Yes, both of these floats (glass and 316 stainless steel) are included with the meter.
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.