InnoCal NIST-Traceable Calibration; Mass Flowmeter

Representative image only.
InnoCal Item # EW-17080-10
  • All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu’s), and test uncertainty ratios (TUR’s) at no additional cost!
  • This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer’s published specification
  • EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
  • Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
  • Testing includes measurement at 5 to 10 points—depending on the meter— equidistant across the range of the flowmeter

PRODUCT OPTIONS

$260.00USD / Each

SPECS & DESCRIPTION

Specifications & Description

  • Calibration TypeAirflow
  • Calibration Test Points5 to 10 points—depending on the meter
  • Calibration Test Range0-500 LPM air flow
  • DescriptionNIST-Traceable Calibration; Mass Flowmeter
NIST Traceable Calibration

Key Features

  • All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu’s), and test uncertainty ratios (TUR’s) at no additional cost!
  • This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer’s published specification
  • EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
  • Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
  • Testing includes measurement at 5 to 10 points—depending on the meter— equidistant across the range of the flowmeter
  • Testing range  0-500 LPM air flow
  • Calibration service for a mass flowmeter
  • Testing range 0.1 to 80,000 sccm at uncertainties as low as (K=2) ±0.2% of reading
  • Testing includes measurement at five to ten points — depending on the meter — equidistant across the range of the flowmeter
  • Certificate includes measured data, graphs, and correlations (if required) to meet the most stringent quality and scientific requirements

More About this Item

With the variety of flowmeter types—from differential pressure to magnetic to ultrasonic—it helps to have highly trained metrologists calibrating the meters for optimal performance. At InnoCal, our computerized, automated standards allow us to perform NIST-traceable mass and correlated flow measurements using air or nitrogen gas. When correlation to other gases is needed, our metrologists will provide you with correlated data or a gas correlation table.

Typical brands that we calibrate include Cole-Parmer, Alicat, Aalborg Instruments, Gilmont, Sierra Instruments, Bios International, and many more.
All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

ACCESSORIES

REVIEWS

REVIEW SNAPSHOT®

by PowerReviews
InnoCal NIST-traceable Calibration; Mass Flowmeter
 
3.0

(based on 3 reviews)

67%

of respondents would recommend this to a friend.

Reviewed by 3 customers

Displaying reviews 1-3

Back to top

 
4.0

Very easy and Fast turn around !

By 

from San Diego

About Me Lab Assistant

Verified Reviewer

Pros

  • Accurate
  • Well Calibrated
  • Works Properly

Cons

    Best Uses

    • In The Lab

    Comments about InnoCal NIST-traceable Calibration; Mass Flowmeter:

    the calibrations are spot on and they stay in contact with you every step of the way.

     
    1.0

    Horrible Experience

    By 

    from Muskegon, MI

    Verified Reviewer

    Pros

      Cons

      • Inaccurate

      Best Uses

      • In The Field

      Comments about InnoCal NIST-traceable Calibration; Mass Flowmeter:

      Had to return two items on the order that were done at incorrect points at different stages. Horrible experience and we will never send in flowmeters to have calibrated again. Willing to pay more to have better service (efficient & accurate).

       
      4.0

      Seems to work fine

      By 

      from Tuscola, Illinois

      About Me Lab Assistant

      Pros

      • Accurate
      • Well Calibrated

      Cons

      • Slow turn around time

      Best Uses

      • In The Lab

      Comments about InnoCal NIST-traceable Calibration; Mass Flowmeter:

      Instrument seems to be more precise after calibration. Took several weeks for return

      Displaying reviews 1-3

      Back to top

      Q&A

      Do you have questions about this product?

      Get answers from real customers and in-house experts with AnswerBox.

      2 Questions | 2 Answers
      Displaying questions 1-2
      • Q:

        Can we send in our previous purchased flow meters to be re-calibrated?
        Asked on 5/3/2010 by Rodney from Valparaiso, IN

        1 answer

        • STAFF EXPERT

          A:

          Yes, you may send in previously purchased flow meters for re-calibration. Please contact us (at the number found under the Contact Us section on our website) to obtain a Return Authorization number prior to sending the flow meter back for re-calibration.

          Answered on 5/5/2010 by Jaime from Technical Support
      • Q:

        I will be purchasing a R-32907-81, 10-1000 lpm, Mass Flow Controller.

        Can specific test points be specified as part of the calibration? For example critical flows for my use are 170 lpm VACUUM and 250 lpm VACUUM. Can those or at least 250 lpm VACUUM be specified as a calibration parameter?
        Asked on 10/28/2009 by Anonymous

        1 answer

        • STAFF EXPERT

          A:

          With this certificate 5-7 points equally spaced across the entire range of the unit are used. For specific points you must order this calibration along with 17100-02.

          Answered on 10/28/2009 by Jen from Technical Support
      Displaying questions 1-2

      Do you have a question about this product? 

      CUSTOMER SUPPORT

      Need Help with this product?

      Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

      Call Us At1-800-323-4340
      Live chat