Lascar EL-WiFi-ALERT Optional Wi-Fi Alert Sensor Monitoring System

Representative image only.
Lascar Mfr # EL-WIFI-ALERT – Item # EW-23039-09
On-the-spot data retrieval and viewing without having to remove the logger
  • Detects alarms from any EL-WiFi sensor device on the same wireless network
  • Audible alarm with built-in speaker (SPL 100dBA @1m)
  • Visual alarm from high brightness LEDs
  • Continues to work when the PC is turned off
  • Easy set-up using the free PC software application

PRODUCT OPTIONS

$172.00USD / Each
$215.00USD / Each

SPECS & DESCRIPTION

Specifications & Description

  • Compatible With18000-08, 18000-09, 18000-11, 18000-12, 23039-01, 23039-02, 23039-03, 23039-07, 23039-08
  • Width (cm)3.05
  • Height (cm)9.73
  • Length (cm)7.13
  • DescriptionOptional Wi-Fi Alert Sensor Monitoring System

Key Features

  • Detects alarms from any EL-WiFi sensor device on the same wireless network
  • Audible alarm with built-in speaker (SPL 100dBA @1m)
  • Visual alarm from high brightness LEDs
  • Continues to work when the PC is turned off
  • Easy set-up using the free PC software application
  • Rechargeable internal lithium polymer battery for short term backup during mains failure

More About this Item

The EL-WiFi-Alert is a standalone monitoring system for all sensor devices within the EasyLog WiFi range. The EL-WiFi-Alert will receive alarm messages from any EL-WiFi sensor device connected to the same wireless network.
The EL-WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of nine alarm tones. The EL-WiFi-Alert continues to work when the PC is turned off.
The EL-WiFi-Alert is designed to be continuously powered via the mains and is supplied with a universal power adaptor. However, it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a power failure.
The WiFi signal strength indicator is activated by pressing the EL-WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The audible alarm can be muted by pressing the EL-WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
Set-up is completed through software installed on the PC. After initial set-up, audible and visual alarms can be reconfigured, wirelessly, using the PC software.
The EL-WiFi-Alert can be attached to a wall or flat surface using the bracket provided, and has a protection rating of IP44 (with cable connected).
This device is IEEE 802.11b compliant, supports WEP, WPA/WPA2 and WPA-Enterprise (*MS-CHAPv2, PEAP, EAP-FAST, EAP-TTLS).

REVIEWS

Q&A

CUSTOMER SUPPORT

Need Help with this product?

Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

Call Us At1-800-323-4340
Live chat