Display type1.75" W x 3.25" H (45 x 84 mm), backlit graphic
Max Dissolved Oxygen4000 mg/L
OutputUSB host, USB device, SD card
Data Logging (points)672 data points
WaterproofYes
Power (VAC)100 to 240
Power (Hz)50/60
Battery3 x C batteries (included)
Width (in)7
Height (in)8
DescriptionBOD Mesurement System for 6 Samples
Warranty2 year
Includes
control unit, six sensor heads, six bottles with gaskets, six stir bars, two overflow flasks (157 and 428 mL), inductive magnetic stirrer, remote controller, 50-mL bottle potassium hydroxide solution, 50-mL bottle nitrification inhibitor, USB cable, three alkaline C batteries, and power supply with split cable for control unit and stirrer. Model 53104-15 adds another control unit, six sensor heads, six bottles with gaskets, six stir bars, inductive magnetic stirrer, USB cable, three alkaline C batteries, and power supply with split cable.
Key Features
BOD values stored in the measurement head are viewable any time on the large display
User-selectable measurement period up to 28 days suits research, standard BOD, and OECD Ready Biodegradability tests
Automatic start feature delays test onset until sample temperature reaches incubator temperature
Inductive stirring system requires no maintenance
Sampling rate: 1 reading every hour (day 1), 1 reading every two hours (day 2), 1 reading every 24 hours (day 3 to 28)
2 year warranty
More About this Item
The BD 600-series of manometric measurement system records BOD every hour the first 24 hours, then every two hours during the next 24 hours. More frequent measurements allow you to evaluate the quality of the test early on. Data is stored in each measurement head, which is then accessed by the control unit and shown on the display. Data can be exported to an SD card, USB flash drive, or directly to a PC by USB cable (SD card required). Remote control functions bring up current and recorded measurement data on the control unit''s display, and direct the control unit to export data.
The inductive magnetic stirrer is maintenance-free because it has no moving parts, such as belts and motors. The stirrer is programmed to cycle from slow to fast and back to slow at regular intervals, recentering any displaced stir bars while keeping the sample adequately agitated.
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.
