Extension rod (2"), small hook, medium hook, coupling #10-32F/F, diameter compression plate (2"), thread adapter 5/16-18M to #10-32F, thumb screw for force gauge/indicator, thumb screw for limit switch, allen wrench set, control panel, control panel mounting bracket and hardware, resource CD, and power cord.
Note: To conduct a force measurement test, you must also buy a force gauge, two grips, cables, and software.
Easily measure tensile or yield strength, compression, fatigue, impact, strain, and material ductility with this single-column, motorized, horizontal, push/pull test stand. The modular design allows the addition of control and measurement options to fit your testing needs. Base control features include programmable test speeds from 0.5 to 13 in/min (13-330 mm/min), up/down/stop directional control over an 18" travel distance, travel limit switches, emergency stop, and password protection. Control capabilities may be expanded with add-on functions, so you may configure the test stand to your application needs.
Add-on functions include travel measurement and output, cycling, preload, load holding, an expanded speed range of 0.02 to 45 in/min (0.5 to 1100 mm/min), and break detection — to name a few. The unique FollowMe™ add-on function responds directly to manual pushing and pulling made to the gauge shaft or load cell to increase speed and offers quick setup and positioning. A complete options package is also available and includes all add-on functions and cables required for their use.
This motorized test stand pairs with the Mark-10 Series 5 and 7 force gauges (required for use).
Gauge, grips, cables, and software required and sold separately.
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.