Drive07575-30 (L/S® Digital Console Process Drive)
Pump Head77253-02 (L/S® Cytoflow Pump Head)
Tubing06434-24, 10-ft (C-FLEX® Ultra, L/S® 24)
Tubing sizes acceptedL/S® 15, 24, 35, 36
Drive IP ratingIP 66
Power (VAC)90 to 260
Power (amps)2.2A at 115v; 1.1A at 230v
Power (Hz)50/60
Width (in)9
Height (in)9.31
Length (in)14.58
Width (cm)22.86
Height (cm)23.65
Length (cm)37.03
Open-Head SensorNo
Housing MaterialStainless Steel
DescriptionL/S SS Digital Process Pump w/ Cytoflow Pump Head, 600 rpm
Includes
L/S drive 07575-30, Cytoflow™ pump head 77253-02, 10-ft C-Flex® ULTRA® tubing, and 6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.
Key Features
Convex-roller design is gentler on live cells and shear-sensitive fluids—validated by independent test data
Large-diameter rotor delivers higher flow rates at lower speeds
Low-speed pumping lets you maintain the consistency and characteristics of shear-sensitive fluids
Drive housings are completely sealed—IP66 and NEMA 4X rated—simply hose down to clean
Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
Cytoflow pump head offers the best option for pumping live cells and shear-sensitive fluids--validated by independent test data
Full remote control capabilities allow easy integration into automated processes
Flow range 0.62 to 3700 mL/min with included L/S tubing—flow rate depends on drive rpm, pump head, and tubing size
More About this Item
Developed specifically for pumping delicate live cells and shear-sensitive fluids, the Masterflex L/S Cytoflow pump head is ideal for use in biopharma and microbiology applications where peristaltic pump operators want to minimize cell hemolysis. The extra-large tubing bed combined with fewer rollers results in high flow rates at low motor speeds, which furthers its cell viability advantages.
These precision drives offer analog remote control options and simple programming—ideal for automated process applications. Drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings. Motor is reversible so you can purge tubing before or after pumping and pump fluid in either direction.
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.
