Masterflex pH/ORP Chemical Feed System, Two Pumps, 2.0 GPH, 105 psi, No Controller; 115 VAC

Representative image only.
Masterflex Item # EW-70792-22
Complete and preassembled chemical feed system where 24/7 use is required
  • Maximum flow ranges from 2.2 to 23.8 GPH
  • Pump(s) mounted on a PVC based skid—choose from multiple configurations
  • Preconfigured systems are designed for use in either pH or ORP applications│Shipped complete - "plug and play" installation is as simple as providing power and fluid connections

$11,050.00USD / Each

SPECS & DESCRIPTION

Specifications & Description

  • Max Flow Rate (LPH)2
  • Max Flow Rate (GPH)7.5
  • Max Pressure (PSI)7.2
  • Max Pressure (bar)105
  • Suction Lift, Dry (in H₂O)60
  • Suction Lift, Dry (mm of H₂O)1524
  • Power (VAC)115
  • Power (Hz)50/60
  • Wetted MaterialsAlumina ceramic, fiberglass-reinforced polypropylene (GFRPP), fluoroelastomer, PTFE, PTFE bonded to EPDM
  • Repeatability±1% full-scale
  • Max Temperature (° F)122
  • Max Temperature (° C)50
  • Viscosity, Max (cP)100
  • Duty Cycle ContinuousYes
  • Height (in)24
  • Width (cm)91.4
  • Length (in)30
  • Height (cm)61
  • Width (in)36
  • Length (cm)76.2
  • Shipping weight (lbs)150
  • Shipping weight (kg)68
  • DescriptionpH Chemical Feed System, Two Pumps, 2.0 GPH, 105 psi, 115V

Key Features

  • Maximum flow ranges from 2.2 to 23.8 GPH
  • Pump(s) mounted on a PVC based skid—choose from multiple configurations
  • Preconfigured systems are designed for use in either pH or ORP applications│Shipped complete - "plug and play" installation is as simple as providing power and fluid connections

More About this Item

Systems will include metering pumps.

The skid is available in either single or dual pump configurations and is pre-plumbed for easy installation. pH/ORP systems inject acid or base into your fluid system to maintain a desired set point - will require a separate controller or may be connected to your existing controller.

If a more accurate and reliable measurement system is needed, we offer ORP controller based systems that can also adjust the measured fluid by adding acid and/or base. Controller included. All you have to do is to hook up the fluid and power connections.

Although these preconfigured systems are designed for use in either pH or ORP applications, any number of custom configurations are achievable! Call our Application Specialists to ensure that all of your system needs are met.

REVIEWS

Q&A

CUSTOMER SUPPORT

Need Help with this product?

Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

Call Us At1-800-323-4340
Live chat