thermometer and a 5-ft power cord with a three-prong plug.
Built-in pressure pump has two switch-selectable speeds: 7 or 15 liters/min. Circulation from the pump allows uniformity of ±0.6°C. A white-backed, 76 mm partial immersion thermometer (included) lets you read temperature down to the nearest 1°C. High capacity heater delivers a total of 1000 watts of power for quick heat ups. Visual alarm indicates when high-temperature cutoff has been tripped and can be reset at the push of a button.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:I want to use such a circulating bath to accurately control temperature of an exterior small tank. Where are the inlet and outlet of water circulation of this instrument? Will tubes be afforded together with the instrument? Thanks a lot.
A:Item 01095-25 does not have inlet/outlet ports. Tubing can be attached to the pump outlet (discharge) located above the heating coils. This is a pressure only pump, so it can only be used to circulate fluid externally to a closed system. To circulate externally to an open system, would require a pressure and suction pump which this instrument does not have.
Q:Can this bath be used with mineral oils?
A:Yes, mineral oils can be used in the bath instead of water.
Q:What are the external dimensions of this waterbath?
A:Overall dimensions (L x W x H): 147⁄8" x 14" x 12" (37.7 x 35.6 x 30.5 cm)
Q:What is the temperature range of this bath?
A:The temperature range is 5 degrees above ambient to 100 degrees C.
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.