Cole-Parmer Single-Channel Digital Flame Photometer

Representative image only.
Cole-Parmer Item # EW-02655-00
Unit comes with Na, K, and Ca filters; optional filter for Li is available Built-in secondary regulator and thermally insulated chimney for added safety

$7,360.00USD / Each


Specifications & Description

  • Range0 to 199.9 ppm
  • SpecificityNa, K, Li interference is less than 0.5% of concentration of Na, K, Li, Ca, or Ba, equal to the concentration under analysis
  • SensitivityTo display a min of 100 units, Na <0.5 ppm, K <0.5 ppm, Li < 5 ppm, Ca 5 ppm, Ba 200 ppm
  • LinearityBetter than 2% mid range with Na=3 ppm, k=3 ppm, or Li=5 ppm
  • Reproducibility< 1% CV from the same bulk sample for 20 determinations at Na and K=10 ppm
  • Reading StabilizationApproximately 8 seconds
  • Aspiration Rate2 to 6 mL/min
  • Air Supply6 L/min at 11 psi; oil and moisture free
  • Display3.5-digit LED; 12.5 mm (1/2") H
  • Fuel SupplyHigh-grade propane/butane, or propane/butane mixture regulated at approximately 30 psi; natural gas at 3 to 10" W.G.
  • Width (in)15
  • Height (cm)51
  • Depth (cm)34.5
  • Width (cm)39
  • Power (VAC)120 / 240
  • Power (Hz)50/60
  • DescriptionSingle-Channel Digital Flame Photometer


a built-in secondary regulator, one each of Na+/K+/Ca+ filters, one each of 1000-ppm Na+/K+/Ca+ standards in 500-mL bottles, two meters each of gas and air tubing, plus all necessary connec

More About this Item

This digital flame photometer is designed with user ease and comfort in mind. The sample introduction port is located in the front. Filter replacement is made easy - there's no need to dismantle large sections of the unit. Special features ensure workplace safety, including an automatic gas shutoff if the flame becomes accidently extinguished, as well as a thermally insulated chimney. Unit offers a wide measuring range of 0 to 1999.
Optional linearizer module 02656-10 (use to increase accuracy with biological samples) and optional automatic dilutor 02657-00 are available. Optional barium filter 02655-40, optional lithium filter 02655-55, and three-position filter holder 02655-52 (required for barium and lithium filters) are sold separately. Use the 02657-25 Autosampler to provide a fully automatic analysis solution for long sample runs (requires the 02656-10 Digital Interface and 02656-15 Software for use with the Single-Channel Flame Photometer). Optional Automatic Dilutor will accurately dilute your samples and standards.





by PowerReviews
Cole-Parmer Single-Channel Digital Flame Photometer

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

(3 of 4 customers found this review helpful)


K better than Na


from Trona, CA

About Me Lab Assistant


  • Easy To Use


  • Inaccurate

Best Uses

  • In The Lab

Comments about Cole-Parmer Single-Channel Digital Flame Photometer:

We only use the K to get the KCL 90% of the time but the machine we have doesn't read very well on the Na, the K reads pretty good most of the time but needing the Na to read good important for shipping purposes and ISO relations

Displaying review 1

Back to top


Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

2 Questions | 2 Answers
Displaying questions 1-2
  • Q:

    please explain the usage of decimal touch control the ones is adjacent to the digital display
    Asked on 3/31/2016 by jose from mexico

    1 answer



      The decimal touch control is used to select the decimal point. For example, by using the decimal pushbutton to select a decimal point, a reading of 1000 will be displayed as 100.0

      Answered on 4/4/2016 by Rishi from Technical Support
  • Q:

    Does this come with a printer?
    Asked on 3/9/2016 by John from Smyrna Tn

    1 answer



      This unit is not supplied with a printer. There is not a specific printer that is offered for this unit.

      Answered on 3/11/2016 by Jose from Technical Support
Displaying questions 1-2

Do you have a question about this product? 


Need Help with this product?

Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

Call Us At1-800-323-4340
Live chat