a dial thermometer, one-piece shelf assembly with two aluminum shelves, and a 6-ft (1.8-m) three-wire power cord (120 VAC models include plug).
Ideal for carefully controlled processes such as desiccating, vacuum embedding, plating, and semiconductor processing. Control vacuum levels between 0 and 30" Hg. Silicone door gasket and positive door latch assure a tight seal at all vacuum levels. A three-way valve allows easy evacuation, purging, and venting. The front-mounted stainless steel vacuum line fittings accept 1/4" ID tubing.
Radiant warm-wall heat provides excellent temperature uniformity of ±4°>C at 150°>C. Use the dial thermometer to monitor the chamber temperature. Insert other types of probes such as gas and humidity into the two rear 1/4" NPT(F) ports to monitor the internal atmosphere. Built-in overtemperature thermostat protects your samples from overheating. Aluminum shelves provide minimal heat retention, reducing hot spots.
Reviewed by 1 customer
Displaying review 1
Comments about Cole-Parmer StableTemp Vacuum Oven, 0.7 cu ft, 120 VAC:
The vacuum evac fitting was not installed properly and fell out while connecting the oven . We had to disassemble the oven and install the fitting properly.
The door does not seal well. A heavy application of vacuum grease is necessary and you have to fiddle with the door most times to get it to seal.
The door latch is cheesy and as assembled you have to lift the door to keep the door post from striking the bottom of the latch.
Pass on this oven.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:is it possible to operate this oven with a nitrogen atmosphere rather than under vacuum?
A:Non-corrosive/non-flammable gases such as nitrogen may be used.
Q:Do you have a part number for a replacement door gasket for this oven?
A:The part number for the gasket is 00070ZQ.
Q:Does the product include the vacuum pump required for vacuum drying?
A:Vacuum pumps must be ordered separately. Please contact our technical application specialists for additional assistance (contact information can be found in the "contact us" section on the web page).
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.