Parafilm PM996 Wrap , 4" Wide; 125 Ft/Roll

Representative image only.
Parafilm Mfr # PM996 – Item # EW-06720-40
Colorless, moisture proof plastic film molds to most surfaces
  • Ideal to wrap beakers and flasks
  • Select larger widths for covering trays

PRODUCT OPTIONS

$32.75USD / Roll of 1

SPECS & DESCRIPTION

Specifications & Description

  • ColorClear
  • MaterialParafilm® M
  • Width (in)4
  • Length (ft)125
  • Width (cm)10.2
  • Length (m)38.1
  • DescriptionWrap , 4" Wide; 125 Ft/Roll

Key Features

  • Ideal to wrap beakers and flasks
  • Select larger widths for covering trays

More About this Item

Multipurpose wrap is ideal accessory for any laboratory.


Film 06720-40 comes in a paper dispenser box.

ACCESSORIES

Add Optional Accessories

REVIEWS

REVIEW SNAPSHOT®

by PowerReviews
Parafilm PM996 Wrap , 4" Wide; 125 Ft/Roll
 
4.7

(based on 3 reviews)

100%

of respondents would recommend this to a friend.

Reviewed by 3 customers

Displaying reviews 1-3

Back to top

 
5.0

Love this product!

By 

from St. Paul, MN

Verified Buyer

Comments about Parafilm PM996 Wrap , 4" Wide; 125 Ft/Roll:

Very easy to use and adheres to beakers very well with an excellent seal! Perfect for our testing application.

  • Was this a gift?:
  • No
 
5.0

I'll buy this product again,

By 

from skokie,il

Pros

  • Functional

Cons

    Best Uses

    • In The Lab

    Comments about Parafilm PM996 Wrap , 4" Wide; 125 Ft/Roll:

    in our Lab covering the glass bols!

    (1 of 1 customers found this review helpful)

     
    4.0

    Works well

    By 

    from Co

    About Me Lab Assistant

    Verified Buyer

    Pros

    • Functional
    • Stores Items Safely
    • Well Constructed

    Cons

    • Difficult to Assemble/Install

    Best Uses

    • In The Lab

    Comments about Parafilm PM996 Wrap , 4" Wide; 125 Ft/Roll:

    seems as it get older it gets brittle.

    Displaying reviews 1-3

    Back to top

    Q&A

    Do you have questions about this product?

    Get answers from real customers and in-house experts with AnswerBox.

    19 Questions | 19 Answers
    Displaying questions 1-10Previous | Next »
    • Q:

      Required density or specific gravity of product.
      Asked on 7/13/2016 by O Gi from Greece

      1 answer

      • STAFF EXPERT

        A:

        The density of this is 0.9 g/cc.

        Answered on 7/19/2016 by Charlsie from Technical Support
    • Q:

      Good morning!

      I was wondering if there was a shelf life for this product? I'm conducting an inventory of our warehouse and I found this "lurking" on a back shelf.

      Thank you for any and all assistance!

      Sarah
      Asked on 8/6/2015 by Sara - Business Development from Philadelphia, PA

      1 answer

      • STAFF EXPERT

        A:

        The shelf life of this product is about three years without deterioration if stored at room temperature and at approximately 50% relative humidity.

        Answered on 8/6/2015 by Katie from Technical Support
    • Q:

      Can it be used safely on the skin?
      Asked on 6/15/2015 by None

      1 answer

      • STAFF EXPERT

        A:

        We do not recommend using this with contact on skin.

        Answered on 6/15/2015 by Anonymous
    • Q:

      We use the parafilm to adhere thin strip of solder which has been cut from a solder bar.
      The solder consists of either Tin/Copper or Tin/Lead/Silver.
      Does the parafilm in any way interact with the above composition of the solder?

      We plan to store the parafilm with the adhered solder strip until it is time to cut solder preforms from it, then we will discard the parafilm.

      As per the specification datasheet provided by Cole-Parmer, "PARAFILM® M can be stored for at least 3 years without loss of quality under storage condition between 7 °C and 32 °C and a relative humidity of 50%."

      Does the parafilm have a date of manufacture printed on it?
      If yes, does this mean that we could label parafilm with the adhered solder strip to have an expiration of 3 years from date of manufacture of the parafilm (Note: The solder bar does not have a shelf life)?

      Thanks,
      Chirag
      Asked on 1/7/2015 by Chirag

      1 answer

      • STAFF EXPERT

        A:

        The parafim has an A or B rating with the materials listed. There is no manufacturing date printed on the individual box or on the parafilm itself.

        Answered on 1/9/2015 by Danielle from Technical Support
    • Q:

      Good afternoon user..

      I would like to ask some question about this product. Can it re-used after incubation period?. if it re-used, how much the cycle?

      Tks,
      Acha
      Asked on 11/24/2014 by Acha from Indonesia

      1 answer

      • STAFF EXPERT

        A:

        Parafilm is usually a bit disposable, but as long as it does not go above or below the temperature range, it should be fine.

        Answered on 11/25/2014 by Anthony from Technical Support
    • Q:

      How well does this stick to plastic bottles?
      Asked on 8/8/2014 by Jason

      1 answer

      • STAFF EXPERT

        A:

        That would depend on the plastic and other application variables. It molds to most surfaces and grips to itself quite well.

        Answered on 8/8/2014 by Jay from Technical Support
    • Q:

      is this product xray proof
      Asked on 8/19/2013 by bolby from alaska

      1 answer

      • STAFF EXPERT

        A:

        No, this product is not x-ray proof.

        Answered on 8/19/2013 by Jack from Technical Support
    • Q:

      I will be freezing samples around -130C, will this parafilm be able to sustain those temperatures?
      Asked on 7/23/2013 by spacey

      1 answer

      • STAFF EXPERT

        A:

        This is only rated to a minimum temperature of -45 degrees Celsius for continuous sue. It would not be recommended for use at -130 degrees Celsius.

        Answered on 7/23/2013 by Jose from Technical Support
    • Q:

      what is the temperature rating for this material?
      Asked on 10/17/2012 by Don from San Clemente, CA

      1 answer

      • STAFF EXPERT

        A:

        Film becomes soft and sticky at about 130°F to 150°F (68°C)

        Answered on 10/17/2012 by Jen from Technical Support
    • Q:

      What is the differnce in performace on the two types of Parafilm model's PM-999 and PM-996? Is there any difference in the composition of the two?
      Asked on 3/21/2012 by Idris from Loughborough, UK

      1 answer

      • STAFF EXPERT

        A:

        The only difference between the two types of Parafilm are the sizes and dispensers.

        Answered on 3/22/2012 by Rita from Customer Service
    Displaying questions 1-10Previous | Next »

    Do you have a question about this product? 

    CUSTOMER SUPPORT

    Need Help with this product?

    Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

    Call Us At1-800-323-4340
    Live chat