This item is now discontinued. We recommend the following as suggested replacements: EW-14576-00

Cole-Parmer StableTemp Water bath, 2L deep, 120V

Representative image only.
Cole-Parmer StableTemp Item # EW-14575-00
Easy-to-set temperature control with adjustable presets for fast set point changes
  • Front panel lockout prevents unauthorized set point changes
  • Hinged lid directs coundensation back into the bath — prevents wet, messy benchtops
  • Extensive over-temperature protection

SPECS & DESCRIPTION

Specifications & Description

  • Bath TypeUtility Water Bath
  • Reservoir Capacity (L)2
  • Max Temperature (° C)100
  • Min Temperature (° C)Ambient
  • Low-Level CutoffYes
  • Bath Opening Length (in)3
  • Heater Wattage (watts)120
  • Temperature ControlPID
  • Display TypeLED
  • Wetted Materials304 SS
  • Power (VAC)115
  • Power (Hz)50/60
  • DescriptionWater bath, 2L deep, 120V
Two year warranty

Includes

gabled lid, perforated stainless steel tray, and 6-ft (0.9-m) power cord with plug (European plug on 240 VAC models).

Key Features

  • Front panel lockout prevents unauthorized set point changes
  • Hinged lid directs coundensation back into the bath — prevents wet, messy benchtops
  • Extensive over-temperature protection

More About this Item

The name says it all! Our StableTemp utility baths feature unique air-jacketed heaters which provide excellent temperature specifications. The +/-0.2°C temperature uniformity and +/-0.25°C stability are ideal for heating your temperature-sensitive samples.

For optimum temperature protection, these baths feature dual thermostats — a primary, microprocessor-based temperature controller that provides +/-0.1°C precision and a secondary over temperature safety prevents samples from overheating. For optimum temperature accuracy, the primary controller can be calibrated to your reference thermometer.

The stainless steel tank is seamless — no welds to leak or rust — and the rounded corners provide an easy-to-clean interior. Hinged polycarbonate lid allows condensation to flow back.

Optional shaker platforms are available to convert the 20 and 28 L digital utility baths into shaking water baths. Allows samples to incubate and aggitate simultaneously.

ACCESSORIES

REVIEWS

Q&A

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

4 Questions | 4 Answers
Displaying questions 1-4
  • Q:

    We have a WD02C11B, will the EW-12504-91 fit in it?
    Asked on 3/4/2014 by keith

    1 answer

    • STAFF EXPERT

      A:

      The bath opening is 4 1/2" x 3 7/8" and will accept up to 4 of the 12504-91 holders. The 12504-91 will hold a flask with max diameter 1.4 inch, smallest diameter it will hold is 1 inch.

      Answered on 3/4/2014 by Polo from Technical Support
  • Q:

    My water batch is reading 40.5C but the temperature of the water is 37C. How do i calibrate the unit?
    Asked on 2/19/2013 by Cameron from Atlanta, GA

    1 answer

    • STAFF EXPERT

      A:

      There is a temperature calibration offset option. With a stable temperature reading, press P2 and P3 simultaneously and release and repeat until the display reads 0.0. Press P1 and hold until "CAL" is displayed (usually about 2 seconds). At one second intervals, the displayed value will alternate between the 'actual' bath temperature and the current offset value, which is the difference between the factory calibration settings and your reference temperature sensor. Use the UP and DOWN keys to adjust value to the desired setting. Press P1 again or allow unit to time out to accept the change. The maximum offset is +/- 3.0 degrees C from factory calibration. Differences greater than this generally indicate a failed or failing temperature sensor.

      Answered on 2/20/2013 by Jay from Customer Service
  • Q:

    just wanted to confirm whether this is a shaking water bath? Thanks
    Asked on 3/1/2011 by Anonymous

    1 answer

    • Staff Reviewer

      A:

      This is not a shaking waterbath and we do not have a small enough shaking platform for this model. For the smallest bath with optional platform please see part numbers 12504-60 and bath 14575-16.

      Answered on 3/2/2011 by Jen from Technical Support
  • Q:

    Are the dimensions mentioned in the specifications the exterior dimensions, and if so, what are the interior dimensions?
    Asked on 11/18/2009 by Anonymous

    1 answer

    • STAFF EXPERT

      A:

      The overall dimensions (exterior) are 8" W x 8-1/8" H x 9" D. The interior dimensions (bath opening) are 4-1/2" W x 3-7/8" H x 6" D.

      Answered on 11/18/2009 by Jaime from Technical Support
Displaying questions 1-4

Do you have a question about this product? 

CUSTOMER SUPPORT

Need Help with this product?

Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

Call Us At1-800-323-4340
Live chat

Alternatives

Alternatives