Polycarbonate Filter Holder, 13 mm, 12/pk

Representative image only.
Item # EW-29550-40
Designed for the filtration of aqueous solutions

PRODUCT OPTIONS

$143.43USD / Pkg of 12

SPECS & DESCRIPTION

Specifications & Description

  • Filter Diameter (mm)13
  • Body MaterialPolycarbonate
  • O-RingSilicone
  • Filtration Area (cm²)0.5
  • Inlet ConnectionFemale luer
  • Outlet ConnectionsMale luer slip
  • DescriptionPolycarbonate Filter Holder, 13 mm, 12/pk

More About this Item

These reusable holders are made of clear, autoclavable polycarbonate with silicone gasket or O-rings. The bell-shaped base protects the filtrate from repeated contamination while following in a receiver. Maximum operating pressure is 101 psi.

Model 29550-44 has hose nipples which can be replaced by luer connectors to use it as a large-area syringe filter holder.

REVIEWS

Q&A

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

7 Questions | 7 Answers
Displaying questions 1-7
  • Q:

    Does the filter have any screen to keep the filter on it?
    Asked on 7/14/2016 by shabnam from Canada

    1 answer

    • STAFF EXPERT

      A:

      You put the screen between the top and bottom parts, then screw them together. This will keep the filter in place.

      Answered on 8/25/2016 by Ethan from Technical Support
  • Q:

    We currently have some holders similar to this one, but it can't hold filter with 1.65 mm in thickness. Can this holder hold that kind of thickness?
    Asked on 1/13/2015 by Betty from United States

    1 answer

    • STAFF EXPERT

      A:

      The holder would likely leak at the threads due to the thickness of a 1.65mm filter.

      Answered on 1/13/2015 by Dan from Technical Support
  • Q:

    Can we "open" the holder, pack it with sand grains instead of consolidated filter medium and then close the "lid"?
    Asked on 11/19/2014 by Physics

    1 answer

    • STAFF EXPERT

      A:

      This filter housing is threaded internally, therefore, the grains of sand will not allow for a seal on the threads causing the filter to leak.

      Answered on 11/20/2014 by Polo from Technical Support
  • Q:

    Does this have luer or luer lock fittings?
    Asked on 4/9/2011 by Anonymous

    1 answer

    • Staff Reviewer

      A:

      This has a female luer lock inlet, and luer slip outlet.

      Answered on 4/11/2011 by Jen from Technical Support
  • Q:

    Do you also sell the o-rings for those filter holders apart?
    Asked on 7/29/2010 by Laura from Oregon

    1 answer

    • STAFF EXPERT

      A:

      We so not have the o-rings in our system at this time, but can undoubtedly get them; there may be a minimum order however.

      Answered on 8/3/2010 by Jon from Technical Support
  • Q:

    Can you sandwich any kind of filter (e.g. any grade filter paper) within the holder, attach the holder to a syringe and then filter away?
    Asked on 3/29/2010 by Anonymous

    1 answer

    • STAFF EXPERT

      A:

      You can use any 13mm filter paper with these filter holders.

      Answered on 3/31/2010 by David from Tech Support
  • Q:

    I have a few questions about this product. 1) Does this product open easily to replace the filter material? i.e. does it unscrew? 2) What is the approximate volume of space inside the holder? 3) What is the length of this filter holder?
    Asked on 9/15/2009 by David from Blackville, SC

    1 answer

    • STAFF EXPERT

      A:

      This unit unscrews for easy access to the filter. This unit has a filtration area of 0.5cm^2 and uses 13mm diameter filters. The total filter volume is 0.3mL.
      We are awaiting a dimensional drawing of this unit for more detailed specifications. Please contact our technical application specialists for additional assistance (contact information can be found on the product web page).

      Answered on 9/18/2009 by Jen from Technical Support
Displaying questions 1-7

Do you have a question about this product? 

CUSTOMER SUPPORT

Need Help with this product?

Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

Call Us At1-800-323-4340
Live chat