Masterflex I/P Precision Brushless Pump System with Easy-Load® Pump Head, 90 to 260 VAC

Representative image only.
Masterflex Item # EW-77963-10
Powerful, low-maintenance drives with precise, repeatable speed control
  • Three-turn speed control offers precision and repeatability — LED display shows percent speed with 1% resolution
  • 1/3-hp brushless motor handles challenging applications with minimal maintenance
  • Non-chip epoxy-coated, IP55-rated steel and aluminum enclosure protects against moisture, chemicals, and dust
  • Compact drives are light enough to carry with one hand, but powerful enough to drive two pump heads
  • Flow: 0.4 to 8.0 LPM (0.11 to 2.1 GPM) with included I/P® 73 tubing; flow rate depends on motor rpm and tubing size.

PRODUCT OPTIONS

$3,280.00USD / Each

$133.00USD / Each

for an additional
$133.00USD / Each
Time to recalibrate? Click on the calibration service to view details, then order.
Often Bought with…

SPECS & DESCRIPTION

Specifications & Description

  • Pump SeriesI/P
  • Control TypeVariable-Speed Digital
  • Min RPM33
  • Max RPM650
  • Number of Channels1
  • Max Flow Rate Per Channel (LPM)8
  • Min Flow Rate Per Channel (LPM)0.04
  • Max Flow Rate Per Channel (mL/min)8000
  • Min Flow Rate Per Channel (mL/min)40
  • Drive77410-10 (I/P® Brushless Process Drive)
  • Pump Head77602-10 (I/P® Easy-Load Pump Head)
  • Tubing06440-73, 10-ft (Tygon® E-LFL, I/P® 73)
  • Tubing sizes acceptedI/P® 26, 73, 82
  • Drive IP ratingIP 55
  • Power (VAC)90 to 260
  • Power (amps)4.5A at 115v; 2.5A at 230v
  • Power (Hz)50/60
  • Width (in)14
  • Height (in)9
  • Length (in)13
  • Width (cm)35.56
  • Height (cm)22.86
  • Length (cm)33.02
  • DescriptionI/P precision brushless pump system with Easy-Load pump head 77602-10
Two year warranty

Key Features

  • Three-turn speed control offers precision and repeatability — LED display shows percent speed with 1% resolution
  • 1/3-hp brushless motor handles challenging applications with minimal maintenance
  • Non-chip epoxy-coated, IP55-rated steel and aluminum enclosure protects against moisture, chemicals, and dust
  • Compact drives are light enough to carry with one hand, but powerful enough to drive two pump heads
  • Flow: 0.4 to 8.0 LPM (0.11 to 2.1 GPM) with included I/P® 73 tubing; flow rate depends on motor rpm and tubing size.
  • Three-turn speed control offers precision and repeatability — LED display shows percent speed with 1% resolution
  • 1/3-hp brushless motor handles challenging applications with minimal maintenance
  • Non-chip epoxy-coated, IP55-rated steel and aluminum enclosure protects against moisture, chemicals, and dust
  • Compact drives are light enough to carry with one hand, but powerful enough to drive two pump heads

REVIEWS

Q&A

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

17 Questions | 18 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    Can I use this pipe for an application with the following specifiations:

    Medium: Seawater
    Salt concentration: 3-5%
    Feed pressure: 1-1.5 bar
    Operating temperature: 40-100 °C
    Asked on 2/13/2017 by Mithat from Luxembourg

    1 answer

    • STAFF EXPERT

      A:

      This pump will come with C-Flex Ultra tubing which is compatible with this application.

      Answered on 2/16/2017 by Eric from Technical Support
  • Q:

    How much does this pump weigh and what is the max suction lift?
    Asked on 12/19/2016 by Derek

    1 answer

    • STAFF EXPERT

      A:

      This pump set weighs 34 lbs. Suction lift will vary greatly on the viscosity and size of the tubing. However, with the tubing that comes in this set, there should be a suction lift of 25ft H2O

      Answered on 12/19/2016 by Anthony from Technical Support
  • Q:

    Does the dial on this pump allow for the pump to be stopped or turned off? Or does the dial only go to the minimum volume?
    Asked on 12/7/2015 by Beth from Minnesota

    1 answer

    • STAFF EXPERT

      A:

      The start/stop button governs that function. The dial only selects speeds from 5-100% of full scale (33-650rpm). These are the minimum and maximum speeds the drive is capable of.

      Answered on 12/10/2015 by Eric from Technical Support
  • Q:

    what size of silicon this pump can fix? i have 17# size silicon tubing.
    Asked on 10/22/2015 by Dr. Ahmad from Kluang Johor Malaysia

    1 answer

    • STAFF EXPERT

      A:

      This pump takes I/P 26, I/P 73, I/P 82 size tubing.

      Answered on 10/23/2015 by Jen from Technical Support
  • Q:

    Do you sell the tool for turning the pump manually? - If yes, can i take a look at the link of the tool?
    Asked on 10/12/2015 by Jolene

    1 answer

    • STAFF EXPERT

      A:

      There is not a tool to manually turn this pump.

      Answered on 10/13/2015 by Danielle from Technical Support
  • Q:

    Is there a tool for the pump such that I can turn the pump manually (at the hole below the part where the tubing is inserted) at the slow speed i want? Will doing this spoil the pump over time?
    Asked on 10/12/2015 by Jolene

    1 answer

    • STAFF EXPERT

      A:

      The EasyLoad pump head on the pump has a slot in the front, where you are able to turn the rotor manually. This will not effect the torque of the drive.

      Answered on 10/12/2015 by Katie from Technical Support
  • Q:

    Can I run C-flex 7/16" x 1/4" tubing successfully in this pump? I plan to run 2 pump heads at around 400 rpm. Thx!
    Asked on 10/8/2015 by Steve from San Diego

    1 answer

    • STAFF EXPERT

      A:

      Masterflex tubing is the only tubing for use in Masterflex pumps. The pump head determines the size. Depending on the specific head which this pump accepts, the option is the I/P size 26 which has a 1/4"ID.

      Answered on 10/9/2015 by Dan from Technical Support
  • Q:

    what are the product codes of all components?
    Asked on 6/10/2014 by Xuefeng from Hangzhou, China

    1 answer

    • STAFF EXPERT

      A:

      This system configuration will include the pump drive of 77410-10 and the Easy Load pump head of 77601-10. This will also include 10 ft of the C-Flex Ultra tubing of 06434-73.

      Answered on 6/10/2014 by Jose from Technical Support
  • Q:

    what is the maximun pressure that the pump can handle
    Asked on 7/24/2013 by Walter from PERU

    1 answer

    • STAFF EXPERT

      A:

      The maximum pressure depends on the tubing used, fluid temperature and other factors. Under ideal conditions and with firm-walled tubing, the maximum is 20 to 40 psi. This system comes with C-FLEX I/P 73, which is not firm-walled. Thus, the maximum would be somewhat less than 40 psi, subject to other conditions.

      Answered on 7/25/2013 by Christina from Technical Support
  • Q:

    I want to measure the pressure. How to install a pressure gauge in this device?
    Asked on 7/19/2013 by YiLung from Taiwan

    1 answer

    • STAFF EXPERT

      A:

      It would depend upon the tubing you are using. You could place a "Tee" in the tubing line and then a gauge this way. You will see an email from me shortly containing contact information for further assistance.

      Answered on 7/19/2013 by Jen from Technical Support
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 

CUSTOMER SUPPORT

Need Help with this product?

Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

Call Us At1-800-323-4340
Live chat