Techne F937D Temp Controller for Small Fluidized Sand Baths

Representative image only.
Techne Item # EW-01184-50
Fast heat-ups and accurate temperature control to 600°C
  • Safer alternative to high temperature oil and salt baths

PRODUCT OPTIONS

$2,300.00USD / Each

SPECS & DESCRIPTION

Specifications & Description

  • Bath TypeSand Bath
  • Temperature SettingDigital
  • Temperature SensorType K Thermocouple
  • DescriptionTemp Controller for Small Fluidized Sand Baths

Key Features

  • Safer alternative to high temperature oil and salt baths

More About this Item

Temperature Controller integrates an air flowmeter and a PID temperature control with dual-setpoint programming to improve accuracy, increase temperature stability to ±0.2°C, and allow temperature settings to 1°C/°F. Includes a chromel/alumel type K thermocouple which fits into the bath’s thermowell, and 10-ft of 3/8" tubing for air flow control.

Photo shows system with Temperature controller.

Temperature Controller integrates an air flowmeter and a PID temperature control with dual-setpoint programming to improve accuracy, increase temperature stability to ±0.2°C, and allow temperature settings to 1°C/°F.

Includes a chromel/alumel type K thermocouple which fits into the bath’s thermowell, and 10-ft of 3/8" tubing for air flow control.

REVIEWS

Q&A

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

1 Question | 1 Answer
Displaying question 1
  • Q:

    Hi

    I have one doubt about Techne F937P, TC-9D Temperature Controller EW-01184-50.

    In the intallation section of the product manual, it is said: "Connect a clead dry air supply regulated to 30 PSI via 3/8" OD or 9.5mm OD tubing. This tubing should be plugged into the quick disconnect fitting on the back oh the TC9D labeled "air suply". Connect 3/8" OD or 9.5mm OD tubing between the Fluidized bath and the quick disconnect fitting on the back labeled "Fluidized bath" ".

    On the back of the TC9D there are two quick disconnect fittings (one above and one below), but they don't have any specification! I would like to know which one is the "air supply" plug and which one is the "Fluidized bath" plug.

    Thank you
    Caio
    Asked on 4/27/2014 by Caio from Brasília, Brazil

    1 answer

    • STAFF EXPERT

      A:

      The top connection connects to the fluidized bath. The lower connection connects to the air supply.

      Answered on 4/28/2014 by Dan from Technical Support
Displaying question 1

Do you have a question about this product? 

CUSTOMER SUPPORT

Need Help with this product?

Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

Call Us At1-800-323-4340
Live chat