Techne Fluidized sand bath systems; temperature range; 50-600°C; 117V; 2x 750W Heaters

Representative image only.
Techne Item # EW-01184-00
Fast heat-ups and accurate temperature control to 600°C
  • Dry, inert, nontoxic aluminum oxide ensures hazard-free operation
  • Safer alternative to high temperature oil and salt baths
  • Requires controller (1184-50) in order to be calibrated
  • Requires 20 lb (9 kg) of brown sand (01184-63)

PRODUCT OPTIONS

$5,380.00USD / Each

$285.00USD / Each

for an additional
$285.00USD / Each
Time to recalibrate? Click on the calibration service to view details, then order.

SPECS & DESCRIPTION

Specifications & Description

  • Bath TypeSpecial Purpose Water Baths
  • Max Temperature (° C)600
  • Min Temperature (° C)50
  • Temperature Uniformity (° C)±1
  • Working Area Width (in)7
  • Working Area Height (in)5 1/2
  • Working Area Depth (in)6 1/2
  • Power (VAC)115
  • Power (Hz)50/60
  • DescriptionFluidized sand bath systems; temperature range; 50-600°C; 117V; 2x 750W Heaters

Includes

overspill flange, and power cord with plug.

Key Features

  • Dry, inert, nontoxic aluminum oxide ensures hazard-free operation
  • Safer alternative to high temperature oil and salt baths
  • Requires controller (1184-50) in order to be calibrated
  • Requires 20 lb (9 kg) of brown sand (01184-63)

More About this Item

Use these fluidized sand baths for your heat treating processes, temperature sensor calibrations, and electrical component testing. Baths use aluminum oxide fluidized by low-pressure air as a dry bath medium with excellent heat transfer properties. Inert, nonflammable aluminum oxide is safer to use than oil and will not corrode your sample vessels or produce toxic fumes. Vessels of all shapes can be easily immersed and safely removed from the bath, without the hazard and mess of hot oils. Make temperature adjustments via a control knob and reference dial. Baths require a dry air flow of approximately 3 cu ft/minute for model 01184-00 and -02 and 5 cu ft/minute for 01184-04 at about 3 psi pressure; order an air pump separately. All baths have a thermowell and an overspill flange. Note: not recommended for shape setting in laboratory research device manufacturing or for heating of reactors.

Controller (1184-50) sold seperately.

ACCESSORIES

REVIEWS

Q&A

CUSTOMER SUPPORT

Need Help with this product?

Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

Call Us At1-800-323-4340
Live chat