YSI 605105 Pro Series Ion Selective Electrode; Chloride

Representative image only.
YSI Mfr # 605105 – Item # EW-59352-28
  • 605105 Pro series ISE probe for Chloride

PRODUCT OPTIONS

$382.00USD / Each

SPECS & DESCRIPTION

Specifications & Description

  • Use WithYSI Professional Plus
  • DescriptionPro Series Ion Selective Electrode; Chloride

Key Features

  • 605105 Pro series ISE probe for Chloride

More About this Item

Replacement electrodes, cables, power adapters, and other accessories for your YSI water analysis meters.

Use with YSI Pro10, Pro1010, Pro1020, Pro1030, or Professional Plus meters.

REVIEWS

Q&A

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

2 Questions | 2 Answers
Displaying questions 1-2
  • Q:

    Hi - I have a client who needs to monitor tapwater rinses in a cleaning process. I think a probe would be a big help to them. We want to see tapwater-type levels in the final rinse tanks. Chloride will be higher upstream - will a single meter satisfy both needs, or is there a better choice for high and low levels.
    Thanks,
    Karen
    Asked on 5/20/2015 by Karen from Golden, CO

    1 answer

    • STAFF EXPERT

      A:

      This is the Chloride ion selective electrode only. The meter is 59352-00 which can measure an ion selective range of +/-1999 mV. In addition to the meter and probe, you will need a cable to connect the two. A 1m long pH/ISE cable is 59352-37. This system will be able to measure a wide range of ions in solution ( -1999 mV to 1999 mV).

      Answered on 5/20/2015 by Danielle from Technical Support
  • Q:

    What are the full specifications on your chloride ion electrode? Range of molarity that can be measured? Also, what are the dimensions of the electrode?
    Asked on 3/5/2015 by Javier from san diego, ca

    1 answer

    • STAFF EXPERT

      A:

      This electrode has a range of 0 to 1000 mg/L, 0 to 40°, the accuracy is ±15% of reading or 5 mg/L, whichever is greater. Note - for use in freshwater applications only. Cables must be ordered separately. This electrode is approximately 2" in dia and 8" long.

      Answered on 3/6/2015 by Danielle from Technical Support
Displaying questions 1-2

Do you have a question about this product? 

CUSTOMER SUPPORT

Need Help with this product?

Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

Call Us At1-800-323-4340
Live chat