Cole-Parmer Free Chlorine and Chlorine Dioxide Sensors

An economical replacement for other chlorine and chlorine dioxide sensors
  • 4 to 20 mA output signal feeds directly into most PLCs, dataloggers, or chart recorders
  • Multiple ranges available
Designed for use in water treatment applications. Sensors measure on-line, in real-time, and are available in two ranges for detecting ppm levels of chlorine dioxide within a pH range of 4 to 11. Sensors have some cross sensitivity with ozone. Three levels of free chlorine can be measured between pH 5.5 to 8.0. Sensors have some cross reactivity with ozone, bromine, and chlorine dioxide.

Sensors feature an internal ATC and signal conditioner to provide a 4 to 20 mA output signal over the measurement range. Sensors and flow cells can be used for new installations or as replacements for other 4 to 20 mA output sensors. Install in existing loop-powered systems or order powered panel meter 94785-12.

Service life exceeds one year in most applications. Membrane caps and fill solution can be replaced to maximize sensor life; order separately.
$1,207.50 - $1,249.00USD / Each

3 variations of this product are available.

See All Product Options Below
3 PRODUCT OPTIONS
  • filter by:
Compareitem specifications
Ion-Selective Electrode Max ISE (ppm)
Availability Pricing
COMPARE
Chlorine dioxide 2
$1,207.50USD / Each
COMPARE
Free chlorine 2
$1,249.00USD / Each
COMPARE
Free chlorine 10
$1,238.00USD / Each
Showing 1- 3 of 3

Need Help with this product?

Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

Call Us At1-800-323-4340
Live chat